Arms

21 products

Metric

Imperial

Card

List

Gravity Center Alignement

1 model

Bracket Table

2 models

D57

1 model

Specific Arm designed in order to take the reaction into the working station

D53 - Torque reaction arms

30 models

Designed to reduce the strain on your operators whilst improving quality, the D53 linear torque reaction arm features folded or linear arms, X/Y positioning, a working area up to 1100mm and a balancer to take the weight and tool reaction.

Benefits

From 5 to 100Nm and available in a linear or folding arm the D53 has the flexibility for any workstation.
Easy to install on your working station with a pre-drilled foot print to reduce installation costs.
X/Y positioning torque arms track the tools position forcing to follow a specific pattern reducing scrap and quality cost.
Takes away the tool torque and weight from the operator wrist reducing the risk of RSI and absenteeism.
Improve operator safety and working conditions, to reduce operator fatigue, down time, and boost your productivity.

Kit USB To Can

1 model

Enable to connect an arm with CANOpen encoders to the Infinity station through a USB interface

Benefits

Use the standard reaction arm with CANOpen encoders

Rail

1 model

D57X

1 model

Specific Arm designed in order to take the reaction into the working station

Adjuster Height

1 model

POSCO

10 models

Whether your process requires a specific tightening sequence or position based program selection, Desoutter’s Posco system, with CVI II Controller, offers you exceptional accuracy and flexibility. Using an encoded arm with X/Y positioning, Posco is a plug and play solution to enhance your error proofing and increase quality.

Benefits

Tools are only enabled when in the correct position, ensuring the quality of each tightening and reducing your warranty costs.
Accurate X/Y digital encoders for high accuracy and repeatability to maximise your quality.
Complete Plug & Play solution with the CVIx 2 platform for unrivalled flexibility and quick setup to lower your installation cost.
Self-learning mode to easily set up your solution for low installation costs.
Extensive arm range to fit your most demanding applications, offering flexibility to your assembly line.
Compact and light design for wall or desk mounted solution and easy integration to lower installation cost.

Stand Holders

2 models

Adaptor - D57 - D58 - D59

2 models

Adaptor - Positioning

1 model

Bench Stand

1 model

D58

1 model

Specific Arm designed in order to take the reaction into the working station

TRA - Telescopic Reaction Arms

22 models

Designed to reduce the strain on your operators whilst improving quality, the TRA suspended telescopic reaction arm features X/Y positioning and torque reaction up to 200Nm to take the weight and tool reaction.

Benefits

From 12 to 200Nm the TRA has the flexibility for any workstation.
Easy to install on your working station with extensive accessories to adapt fixing to your needs to reduce installation costs.
X/Y positioning torque arms track the tools position forcing to follow a specific pattern reducing scrap and quality cost.
Takes away the tool torque and weight from the operator wrist, reducing the risk of RSI and absenteeism.
Improve operator safety and working conditions, to reduce operator fatigue, down time, and boost your productivity.

Stop End

1 model

Tool Adaptor - Clamp

12 models

Interface Adaptor

1 model

Carriage

1 model

Adaptor -TRA

1 model

D59

1 model

Specific Arm designed in order to take the reaction into the working station